Overview

A kick plate covers the bottom of a door on the push side, where shoes, carts and luggage scuff and dent it. This 10in tall x 44in wide kick plate is made from clear polycarbonate (Lexan) with a clear finish and radius corners. Kick plates are usually ordered about 2in narrower than the door, so this 44in plate suits a door about 46in wide. Order it pre-drilled with factory-supplied #8 x 1 1/8in stainless steel screws. It is for interior use only. TheKickPlateStore covers it with a 10-year warranty against defects in material and workmanship.

NOT A STOCKED ITEM. LEAD TIMES APPLY. THIS PRODUCT IS NON-RETURNABLE.

10in x 44in - .040, Surface mounted polycarbonate(Lexan) kick plate with radius corners. (254mm x 1117.6mm)

Use construction adhesive for standard installation. Available pre-drilled for use with mechanical fasteners. Custom sizes are available.

Materials

• Polycarbonate: Type Polycarbonate, .040 gauge, with a Clear finish
• Adhesive: Polyurethane based construction adhesive.

Documentation

• Drawing (712k)
• Suggested Specifications.pdf (243k)
• KickPlate Installation.pdf (68k)
• Kickplate Care & Cleaning.pdf (69k)
• TheKickPlateStore Warranty.pdf (69k)

Optional Standard Hole Pattern

Number of Holes: 12: 6 on Top, 6 on the Bottom

Holes are evenly spaced along the top and bottom edges, approx. 1" - 1.5" from the edges.

NOTE: Interior & Exterior Use

• The materials specified for interior use: Brass, Vinyl, Polycarbonate, and Un-Anodized Aluminum, are not designed or warranted for exterior applications.
• Only Stainless Steel, Diamond Plate, and Anodized Aluminum are recommended for both indoor and outdoor use, as they are engineered to withstand external environmental conditions.
• Improper use of interior-grade materials in exterior settings may result in premature wear, damage, or failure.