Overview

A mop plate covers the bottom of a door on the pull side, where mops, brooms and floor machines hit it. This 4in tall x 29in wide mop plate is made from .060in Type 5052 anodized aluminum with a satin anodized finish. Mop plates are usually ordered about 1in narrower than the door, so this 29in plate suits a door about 30in wide. Order it Basic, for installing with your own heavy-duty construction adhesive (adhesive not supplied) or with countersunk holes and factory-supplied #8 stainless steel screws. Beveled edges (a 45° chamfer) on 3 or 4 sides are available. It is rated for interior and exterior use. TheKickPlateStore covers it with a lifetime warranty against defects in material and workmanship. Standard lead time is about 7–10 business days. Bulk pricing applies automatically: 10% off 20+.

4in x 29in - .060, Surface mounted anodized aluminum kick plate (101.6mm x 736.6mm)

Use construction adhesive for standard installation. Available pre-drilled or pre-drilled and countersunk for use with mechanical fasteners. Custom sizes are available.

Materials:

• Anodized Aluminum: Type 5052, .060 gauge, with a #4 satin finish.
• Adhesive: Polyurethane based construction adhesive

Documentation

• Complete Documentation Package - all documents in one PDF (1.1 MB)
• Drawing (712k)
• Suggested Specifications.pdf (243k)
• KickPlate Installation.pdf (68k)
• Kickplate Care & Cleaning.pdf (69k)
• TheKickPlateStore Warranty.pdf (69k)

Optional Standard Hole Pattern

Number of Holes: 4: 2 on Top, 2 on the Bottom

NOTE: Interior & Exterior Use

• The materials specified for interior use: Brass, Vinyl, Polycarbonate, and Un-Anodized Aluminum, are not designed or warranted for exterior applications.
• Only Stainless Steel, Diamond Plate, and Anodized Aluminum are recommended for both indoor and outdoor use, as they are engineered to withstand external environmental conditions.
• Improper use of interior-grade materials in exterior settings may result in premature wear, damage, or failure.