Kick Plate Sizes & Height: What Size Do I Need?
Posted by TheKickPlateStore on 12th Nov 2026
Quick answer: Most kick plates are 2in narrower than the door and 8in to 12in high. A standard 36in door takes a 34in wide plate; a 32in door takes 30in; a 30in door takes 28in. Commercial doors usually get a 10in or 12in plate, and front doors on homes usually get 6in or 8in.
What width kick plate do I need?
Measure the door from edge to edge and subtract 2in. That leaves a 1in reveal on each side, so the plate clears the frame and the door closes properly. Never order a plate the full width of the door.
| Door width | Kick plate width |
|---|---|
| 28in | 26in |
| 30in | 28in |
| 32in | 30in |
| 34in | 32in |
| 36in (standard exterior and commercial door) | 34in |
| 42in | 40in |
| 48in | 46in |
On a pair of doors, the plates are often made 1in less than each door's width, so they nearly meet at the center.
What height should a kick plate be?
Height depends on what's hitting the door. The name of the plate changes with its height:
| Plate | Height | Typical use |
|---|---|---|
| Mop plate | 4in to 8in | Pull side of commercial doors, protects from mops and floor cleaners |
| Kick plate | 10in to 16in | Push side of doors people open with a foot, cart or shoulder |
| Armor plate | 18in to 48in | Doors hit by carts, stretchers, dollies and pallet jacks |
On a home's front door, 6in and 8in are the common choices. On panelled doors, measure from the bottom of the door to the bottom of the first panel and subtract 2in, so the plate sits on the flat bottom rail.
The ADA 10in rule
The 2010 ADA Standards (section 404.2.10) require the push side of a door to have a smooth surface for the bottom 10in, across the full width of the door, so wheelchair footrests don't catch. That's why 10in kick plates are the default on commercial doors. Plates mounted on doors with recessed panels must not leave a gap or cavity behind them, and beveled edges help footrests slide over the plate.
Standard kick plate sizes we stock
- Metal kick plates (stainless, aluminum, brass, diamond plate): 4in, 6in, 8in, 10in and 12in high, in every width from 18in to 48in.
- Large square armor plates: 22in to 48in.
- Front-door kick plates in decorative finishes and plastic kick plates: 6in or 8in high, 28in, 30in, 32in, 34in or 40in wide.
- Custom sizes: any width and height. See custom orders.
How to measure for a kick plate
- Measure the door's width, edge to edge.
- Measure the height of the flat area at the bottom of the door (to the bottom panel or glass).
- Subtract 2in from the width. Pick a height that fits the flat area (and is at least 10in on commercial push sides).
- Check the door for a door sweep, threshold or closer arm that the plate needs to clear.
Full instructions with a worksheet are on our how to measure and install your kickplate page, and there's a video too.
Frequently asked questions
What is the standard kick plate size?
For a standard 36in door: 34in wide. Height is 8in on most homes and 10in on most commercial doors.
Should a kick plate go on both sides of the door?
Usually just the push side, the side people kick or push. Doors that take damage both ways (kitchens, service corridors) get a kick plate on the push side and a mop plate on the pull side.
Can I get a size that isn't listed?
Yes. We make kick plates to any size. Call 800-513-5976 or email sales@thekickplatestore.com.