Kick Plates on Fire-Rated Doors: The 16in Rule & ADA
Posted by TheKickPlateStore on 12th Nov 2026
Quick answer: Yes, you can put a kick plate on a fire-rated door, but watch the height. Under NFPA 80, the fire door standard, a regular kick plate can be added in the field as long as the top of the plate is no more than 16in above the bottom of the door. Taller plates, such as armor plates, must be labeled for use on fire doors. Your local fire marshal (the authority having jurisdiction) has the final say.
How do I know if a door is fire-rated?
Look at the hinge edge of the door (and the frame). Fire doors carry a permanent label, metal or embossed, showing the testing lab and the rating, such as 20, 45, 60 or 90 minutes. Stairwells, corridors, mechanical rooms and doors between a garage and a home are often fire doors. Never remove or paint over that label.
Kick plate rules for fire doors
| Plate | Height | On a fire door |
|---|---|---|
| Mop plate | 4in to 8in | OK to field-install |
| Kick plate | 10in to 16in | OK to field-install, top of plate at 16in or less |
| Armor plate | 18in to 48in | Must be a labeled plate approved for fire doors |
Fasten plates on fire doors as the door manufacturer allows. Don't cut, notch or modify the door to fit a plate.
The ADA kick plate requirement
The 2010 ADA Standards (section 404.2.10) require the bottom 10in of the push side of a door to be a smooth surface across the full width of the door, so wheelchair footrests and walkers don't catch. Two details matter for kick plates:
- The plate's edges must sit within 1/16in of the door surface. Thin plates with beveled edges help here.
- If the door has recessed panels, any gap the plate creates behind it must be capped (closed off).
A 10in kick plate on the push side, nearly full width, is the simplest way to cover the zone. See the kick plate size guide.
Which kick plates work for fire doors and ADA?
- 10in stainless steel kick plates: 16 gauge, with beveled-edge options.
- 12in stainless steel kick plates for more coverage, still under 16in.
- Anything taller (armor plates up to 48in): call us before ordering for a fire door.
Frequently asked questions
Can I use adhesive kick plates on a fire door?
Follow the door manufacturer's instructions and your local fire marshal. Many specifiers prefer screw-mounted plates on fire doors.
Does a kick plate change a door's fire rating?
Not if it stays within the 16in limit and the door isn't modified. Labeled plates are needed above that.
Questions about a specific door?
Send us a photo of the door's label: 800-513-5976 or sales@thekickplatestore.com.